Mitsubishi Electric ME96SSHA-MB, Руководство пользователя

Страница: 22 / 70

3. Setting
21
3.4. Setting Menu 3:
Display Settings (Setting Maximum Scale and Harmonic Display)
This section shows how to set maximum scale in the bar graph and harmonics display.
In the operation mode, press and simultaneously for 2 seconds or more, and the following operation
becomes available.
Set the voltage maximum scale.
If you have not set voltage to “Display pattern”, this display menu will be skipped.
Maximum scale value
+10 STEP (About 250%)
to
± 0 STEP (100% :
Standard maximum scale value
)
to
-
18 STEP (
About
20%)
Note: The maximum scale value becomes the value in the table on Section 6.3.(page 50 and after).
②
Voltage maximum
scale
＋ －
SET
RESET
SET DISPLAY
SET DISPLAY
SET DISPLAY
SET DISPLAY
Set the setting menu number to "3".
(as shown in the right figure)
Setting menu
Set the current maximum scale.
If you have not set current to “Display pattern”, this display menu will be skipped.
(1)Maximum scale value
Primary Current
(1.4.1Primary Current Setting value)
SP.(Special Setting)
(2)Special current maximum scale
This display is displayed when you set the "SP" in 3.1.
+ 3 STEP (About 120%)
to
± 0 STEP (100% :
Rating
)
to
-
10 STEP (
About
40%)
Note: The maximum scale value becomes the value in the table on Section 6.3.(page 50 and after).
①
Current maximum
scale
＋ －
Set the maximum scale of Active power.
If you have not set active power to “Display pattern”, this display will be skipped.
(1)Maximum scale value
+3 STEP (
Abou t
120%)
to
±0 STEP (100% :
Rating
)
to
-
18 STEP (
About
20%)
Note: The maximum scale value becomes the value in the table on
Section 6.3.(page 50 and after).
(2)single deflection / double deflection
③
Active power
maximum scale
＋ －
single deflection double deflection
SET DISPLAY