Mitsubishi Electric ME96SSEB-MB, Руководство пользователя

Страница: 31 / 100

30
3. How to Set up
Setting Menu 8: Special Settings (Settings for Operating Time and IEC Mode)
This section describes the settings of the operating time and IEC mode.
In the operating mode, press the and buttons simultaneously for 2 seconds or more to enter the
following operation.
For details abo ut each function, refer to the corresponding section.
Operating time
⇒
See 5.2.4 to 5.2.5 .
SET DISPLAY
SET DISPLAY
SET DISPLAY
SET DISPLAY
SET
RESET
SET DISPLAY
Set the threshold of operating time 1 count.
When you select auxiliary power (AUX) at operating time1, this screen is not
displayed.
(1) When you set the counting target of operating time 1 to current:
*If you select
“
min
”
, the operating time will be counted
at current display of other than 0 A.
(2) When you set the counting target of operating time 1 to voltage.
*If you select
“
min
”
, the operating time will be counted
at voltage display of other than 0 V.
③
Operating time 1
Threshold
min 1 to 120%
(Setting step 1%)
min 20 to 120%
(
Setting step 1%)
Select 8 in the setting menu.
*Refer to the right figure.
Setting Menu
Set whether to display the operating time, which integrates
input time of count target and is displayed as load
operating time.
①
Operating time
Display
oFF on
（
Not display
） （
Display
）
Select a count target of operating time 1 from auxiliary
power, current, or voltage.
Item 3-phase 4-wire 1-phase 2-wire Others
AUX AUX AUX AUX
A A
AVG
A A
AVG
V V
AVG
（
L-N
）
V V
AVG
（
L-L
）
②
Operating time 1
Count target
settings
(Auxiliary power) (Current) (Voltage)
AUX A V
Select a count target of operating time 2 from auxiliary power, current, or
voltage.
The setting method is the same as
②
Operating time 1 Counting target
settings.
④
Operating time 2
Count target
settings