Mitsubishi Electric ME96SSEB-MB, Руководство пользователя

Страница: 27 / 100

26
3. How to Set up
Setting Menu 5: Alarm Settings (Settings for Upper/Lower Limit Alarm and Motor
Starting Current Mask Function)
This section describes how to set the upper/lower limit alarm, backlight blinking during alarm, and motor
starting current.
In the operating mode, press the and buttons simultaneously for 2 seconds or more to enter the
following operation.
For details about each function, refer to the following:
・
Upper/lower limit alarm → See
5.2.1 to 5.2.3 .
・ Motor starting current → See
5.2.6 .
SET
RESET
SET DISPLAY
SET DISPLAY
Set a measuring element of upper/lower limit alarm item 1.
This setting enables upper/lower limit monitoring of measured values.
(1) When set to 3-phase 4-wire system
(2) When set to other than 3-phase 4-wire system
①
Upper/Lower
limit alarm item 1
Note1. The measuring elements not included in the display pattern you set can be
selected.
Display for selection
of "A upper limit"
var upper limit
var lower limit
PF upper limit
PF lower limit
Hz upper limit
Hz lower limit
HI total upper limit
HI
N
total upper limit
THD
V
upper limit
non
A upper limit
A lower limit
AN upper limit
DA upper limit
DA lower limit
DAN upper limit
V (L-N) upper limit
V (L-N) lower limit
V (L-L) upper limit
V (L-L) lower limit
W upper limit
W lower limit
non
A upper limit
A lower limit
DA upper limit
DA lower limit
V upper limit
V lower limit
W upper limit
W lower limit
var upper limit
var lower limit
PF upper limit
PF lower limit
Hz upper limit
Hz lower limit
HI total upper limit
THD
V
upper limit
Display for selection
of "non
”
Select 5 in the setting menu.
*Refer to the right figure.
Setting Menu