Mitsubishi Electric MAC-567IF Скачать руководство пользователя страница 18 | Manualshive

Страница: 18 / 68

background image

MELCLOUD

Incorrect handling can have consequences, including injury and damage to the building.

CAUTION!

►

Mount the wi-fi adapter out of the reach of children.
Otherwise there is a risk of injury.

►

Do not stand on an unsteady step stool to set up or clean the wi-fi adapter.
Falling off can cause injury.

►

Do not use the wi-fi adapter near other wireless devices, microwaves, cordless telephones or fax machines.
Otherwise malfunctioning may occur.

3.1.3 Preparations for installing, setting up and using the wi-fi adapter

NOTE!

►

Before beginning installation of the wi-fi adapter, verify that the router supports WPA2-AES encryption.

►

Before the wi-fi adapter can be installed, the end user has to read and accept the general terms and
conditions of the wi-if service provider.

►

A router is needed to complete the connection from this wi-fi adapter to the wi-fi service.

►

The wi-fi adapter does not start transmitting the system’s operating data until the end user has regis-
tered and accepted the general terms and conditions of the wi-fi service provider.

►

This wi-fi adapter should not be installed and connected to any Mitsubishi Electric system which is to
provide application-critical cooling or heating.

►

Please write down the model and other information regarding the wi-fi adapter on the last page of this
manual (“Setting information”) when installing this wi-fi adapter.

•  The Mitsubishi Electric wi-fi adapter is used to communicate with the wi-fi service MELCloud from Mitsubishi Electric.
•  Third-party wi-fi adapters cannot be connected to MELCloud.
•  Mitsubishi Electric is not responsible for any (i) underperformance of a system or any product; (ii) system or product

fault; or (iii) loss or damage to any system or product which is caused by or arises from connection to and/or use of
any third party wi-fi adapter or any third party wi-fi service with Mitsubishi Electric equipment.

For the newest information on MELCloud by Mitsubishi Electric Corporation, please visit
https://innovations.mitsubishi-les.com/de/steuerungen/melcloud

18

/ Software information 2019

«
...
16
17
18
19
20
...
»

Содержание MAC-567IF





































































Отзывы:

Нет отзывов

Похожие инструкции для MAC-567IF

Бренд: Encore Страницы: 125

Бренд: Zte Страницы: 30

Бренд: Four-Faith Страницы: 34

Бренд: ZooZ Страницы: 2

Бренд: Genesis Страницы: 3

Бренд: NimbeLink Страницы: 8

Бренд: Telecom Страницы: 8

Бренд: Telecom Страницы: 28

Cerberus P 6331-4A

Бренд: Pentagram Страницы: 62

Cerberus Wi-Fi Lite

Бренд: Pentagram Страницы: 64

Cerberus ADSL2+ Lite

Бренд: Pentagram Страницы: 75

Бренд: Fritz! Страницы: 250

NetVito 5300 Series

Бренд: Camatel Страницы: 12

Бренд: Hughes Страницы: 29

Бренд: NETGEAR Страницы: 23

DG834PN - RangeMax ADSL Modem Wireless Router

Бренд: NETGEAR Страницы: 108

Бренд: Sierra Wireless Страницы: 15

TFM-560U - 56 Kbps Fax

Бренд: TRENDnet Страницы: 33

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды