—15—
4
Remove the maintenance cover clamping screws (marked
by
▼
) (five special black screws 4 x 16, indicated by
●
).
5
Pull out the maintenance cover, and then remove the switch
cover clamping screw (one PTT screw 4 x 16, indicated by
●
).
6
Open the lid of the switch cover, and then remove the switch
clamping screw (one PPT screw 3 x 10, indicated by
●
).
(3) Display board
1
Perform the same work as in steps
1
through
4
of (2) above.
2
Pull out the maintenance cover, and then remove the display
board lead wires (indicated by
●
).
3
Remove the display board from the mounting spacers
(indicated by
●
).
Содержание JT-SB216DS-W-AUS
