Mitsubishi Electric GT16, Руководство пользователя, Страница: 895 / 1306

41. CONNECTION TO TOSHIBA PLC
41.3 Ethernet Connection
41 - 9
36
CONNECTION T
O
KO
YO EI
P
L
C
37
CONNECTION T
O
JT
EKT PLC
38
CONNECTION T
O
SHA
R
P P
LC
39
CONN
ECT
ION T
O
SHIN
KO
TE
CHNOS
INDI
CA
TI
NG
CONT
ROL
LER
40
CON
N
E
C
T
ION T
O
CHINO CON
T
ROLLER
41
CONNECTION
T
O
T
O
SHI
BA PLC
42
C
O
NNECTION T
O
T
O
SHI
BA MACHI
NE
PLC
43
CONNECTION T
O
P
A
NASO
NIC SER
V
O
AMPLI
F
IE
R

Ethernet setting
*1 Each of [GOT PLC No.] set in the communication detail
setting and [PLC No.] set in the Ethernet setting must be set
to different station numbers.
41.3.2 ■ Communication detail settings
POINT POINT POINT
(1) Communication interface setting by the Utility
The communication interface setting can be
changed on the Utility's [Communication setting]
after writing [Communication Settings] of project
data.
For details on the Utility, refer to the following.
12. COMMUNICATION INTERFACE SETTING
(COMMUNICATION SETTING)
(2) Precedence in communication settings
When settings are made by GT Designer3 or the
Utility, the latest setting is effective.
arbitrary
41.3.3 PLC side setting

Setting of operation mode switch and station
address switch
(1) Station address setting switch
The station address setting switches are hexadecimal
rotary switches that determine the station address on
the Ethernet network.
Set the station address (1 to 254) that has been
assigned upon system configuration in a HEX code.
Assign an address with a different value to each of the
nodes in the system.
(2) Operation mode setting switch
*1 XX indicates the value of the station address setting
switches.
Subnet mask : 255.255.192.0
*2 XX indicates the value of the station address setting
switches.
Subnet mask : 255.255.255.0
*3 It can be set freely from the engineering tool, and the value
has precedence over the value of the station address setting
switches.
Item Description Set value
Host
The host is displayed. (The host is
indicated with an asterisk (*).))
―
N/W No.
Set the network No. of the
connected Ethernet module.
(Default: blank)
1 to 127
PLC No.
*1
Set the station No. of the
connected Ethernet module.
(Default: blank)
1 to 254
Type OMRON (fixed) TOSHIBA (fixed)
IP address
Set the IP address of the
connected Ethernet module.
(Default: blank)
PLC side IP
address
Port No.
Set the port No. of the connected
Ethernet module.
(Default: 9600)
256 to 65534
Communication
format Select a communication protocol.
(Default: UDP)
UDP(fixed)
name Description Range
STN-H Upper address: 0 to F (Hex)
01 to FE (Hex)
STN-L Lower address: 0 to F (Hex)
Description Settings
Switch No.
1 2 3 6 7 8
Operation
mode
Nomal OFF OFF OFF
For maintenance
ON OFF OFF
OFF ON OFF
IP address
type
Class B
172.16.64.XX
*1
OFF OFF OFF
Reserved OFF ON OFF
Class C
192.168.0.XX
*2
OFF OFF ON
Tool setting
*3
ON ON ON
Operation mode
setting switch
Station address
setting switch