Mitsubishi Electric GT16, Руководство пользователя, Страница: 1283 / 1306

64. MODBUS(R)/TCP CONNECTION
64.4 PLC Side Setting
64 - 3
60
CONNECTION T
O
MURA
T
E
C
CONTROLL
ER
61
MI
C
R
O
C
OMPUTER
CONNECTION (SE
R
IA
L)
62
MICR
OCOMPUTER
CONNECTION (E
T
HE
RN
E
T)
63
MO
D
B
US(R)/
R
T
U
CONNE
C
T
ION)
64
MO
DBUS(R)/
TCP
CON
N
E
C
T
ION
65
V
NC(R) S
E
R
V
E
R
CONNECTION
64.3.3 Ethernet setting
*1 Select [MODBUS/TCP] for [Controller Type].
For the applicable Ethernet module, refer to the following.
64.2 System Configuration
*2 Each of [GOT PLC No.] set in the communication detail
setting and [PLC No.] set in the Ethernet setting must be set
to different station numbers.
64.3.2 Communication detail settings
POINT POINT POINT
(1) Communication interface setting by the Utility
The communication interface setting can be
changed on the Utility's [Communication setting]
after writing [Communication Settings] of project
data.
For details on the Utility, refer to the following.
12. COMMUNICATION INTERFACE SETTING
(COMMUNICATION SETTING)
(2) Precedence in communication settings
When settings are made by GT Designer3 or the
Utility, the latest setting is effective.
64.4 PLC Side Setting
For details of the MODBUS/TCP equipment, refer to the manual of MODBUS/TCP equipment to be used.
Item Description Range
Host
The host is displayed. (The host is
indicated with an asterisk (*).)
―
N/W No.
Set the network No. of the
connected Ethernet module.
(Default: blank)
1 to 239
PLC No.
*2
Set the station No. of the
connected Ethernet module.
(Default: blank)
1 to 247
Type
*1
MODBUS/TCP (fixed)
MODBUS/TCP
(fixed)
IP Address
Set the IP address of the
connected Ethernet module.
(Default: blank)
PLC side IP
address
Port No.
Set the port No. of the connected
Ethernet module.
(Default: 502)
1 to 65535
Communication
format
TCP (fixed) TCP (fixed)