Mitsubishi Electric GT14, Руководство пользователя

Страница: 1514 / 1546

62 - 68
62. MICROCOMPUTER CONNECTION (ETHERNET)
62.6 System Configuration Examples
62.6 System Configuration Examples
For sample programs for the microcomputer connection (GOT sample project data and sample programs on the host
side), contact your local distributor.
62.7 Device Range that Can Be Set
For details on the device range of controllers that can be used on GT14 Handy, refer to the following manuals.
GT Designer3 Version1 Screen Design Manual (Fundamentals)
GOT1000 Series Connection Manual (Microcomputer, MODBUS Products, Peripherals) for GT
Works3
62.8 Precautions

GOT clock control
The settings of "time adjusting" or "time broadcast" made on the GOT will be disabled on the PLC.
Use the dedicated commands to set or read out the clock data of microcomputer.

UDP/IP connection
When the commands are sent from multiple controllers simultaneously, the GOT may not receive all the commands.
Retry sending the commands on the controller, to receive them on the GOT again.

Station monitoring function
The microcomputer connection (Ethernet) does not support the station monitoring function.

Interrupt output
The interrupt output is effective only at TCP/IP connection.
At UDP/IP connection, the interrupt output is not enabled.