Mitsubishi Electric GOT SIMPLE Series, Руководство пользователя

Страница: 81 / 310

11 COMMUNICATION INTERFACE SETTING (COMMUNICATION SETTING)
11.1 Standard I/F Setting
79
11
Detail information setting operation
For Standard I/F-1(RS422) and Standard I/F-2(RS232)
1.
Touch each driver display box of the standard I/F-1 and standard I/F-
2.
2.
The screen jumps to the detailed information screen and the
communication parameter will appear.
3.
Touch the numerical values of baud rate to switch them repeatedly.
The numerical values are set using the ten-key depending on the setting.
"0" to "9":
Use these keys to enter numerical values. Enter "0" to disable the screen
saver function.
"ESC":
Closes the ten-key window without saving any value entered
"AC":
Deletes the entire string of numerical characters that are being entered
"DEL":
Deletes a digit from a string of numerical characters that are being
entered
"ENT":
Enters the value for the clock that has been entered and closes the ten-
key pad window
"+/-":
Switches between positive and negative values. (Only positive values are
valid for the clock setting.)
"." :
Invalid key (not used)
Touch [Driver display BOX].
Ex. 4800bps 9600bps 19200bps