Mitsubishi Electric GOT SIMPLE Series, Руководство пользователя

Страница: 204 / 310

202
15 CONTROL OF VARIOUS DATA (DATA CONTROL)
15.8 BACKUP/RESTORE
Access range
Access range with connection types
The following shows a target controller of the backup/restore execution with each connection type.
With multi-channel function
With the multi-channel function, the backup and restoration is executed per channel.
Backing up/restoring data for multiple CPU system
Only batch backup of all controllers is executed.
Backup of only specified ones among the controllers Nos. 1 to 4 is not supported.
Precautions
Precautions for backup
■
Data that cannot be backed up
The GOT cannot back up device current values and data stored in device memories.
For collecting device current values, use the recipe function.
For how to use the recipe function, refer to the following manual.

GT Designer3 (GOT2000) Screen Design Manual
For collecting data stored in device memories, use GX Developer.
■
Names of files to be backed up
When characters other than the characters defined in the shift JIS code and ASCII code are used for file names, the file
names may not be correctly displayed with the data backed up on the GOT.
For using the backup/restore function, use characters in the JIS code and ASCII code for file names.
■
Backing up intelligent function module parameters
For backing up an intelligent function module parameter (IPARAM.QPA), only the parameters that can be stored in the PLC
CPU are the target parameters.
To store other intelligent function module parameters than those, GX Configurator applied to GX Works2 and the intelligent
function module is required.
For the intelligent function module parameters that can be stored in the PLC CPU, refer to the following.

GX Works2 Version 1 Operating Manual (Intelligent Function Module)
■
Compatibility of backup data
The backup data used in GS21 cannot be used in GT27, GT25, and GT23.
The backup data used in GT27, GT25, and GT23 cannot be used in GS21.
Connection type Target controller
Computer link connection Host station
Ethernet connection Host station