Mitsubishi Electric GOT SIMPLE Series, Руководство пользователя

Страница: 124 / 310

122
12 DISPLAY AND OPERATION SETTINGS (GOT SET UP)
12.7 IP Filter Setting
12.7
IP Filter Setting
IP filter setting
IP addresses from which access to the GOT is allowed or blocked can be set.
For the details of the IP filter setting, refer to the following.

GT Designer3 (GOT2000) Screen Design Manual
*1 Leave the boxes blank if you do not set any IP addresses.
Display operation of the IP filter setting
Item Description Setting range
IP filter usage You can set whether to use or not the IP filter function. Yes/No
<Default: No>
Transmit/Block You can set whether to allow or block access from the IP addresses specified in [IP
address setting].
• If [Transmit] is selected
Access from the IP addresses that are set for [Target IP address] is allowed.
Access from the IP addresses that are set for [Exception IP address] is blocked.
• If [Block] is selected
Access from the IP addresses that are set for [Target IP address] is blocked.
Access from the IP addresses that are set for [Exception IP address] is allowed.
Transmit/Block
<Default: Transmit>
IP address
setting Range You can set whether to register IP addresses by specifying a range.
To specify a range, set the start IP address and the end IP address for [Target IP
address]. Selected/Not selected
<Default: Not selected>
Target IP address You can set IP addresses or IP address ranges to be filtered.
Up to 4 ranges can be set. 0.0.0.0 to 255.255.255.255
*1
<Default: Blank>
Exception IP
address This item can be set only when [Range] is selected.
For an IP address range specified in [Target IP address], set IP addresses excluded
from being filtered.
Up to 16 addresses can be set for one range specified in [Target IP address]. 0.0.0.0 to 255.255.255.255
*1
<Default: Blank>
Touch
[IP filter setting].
GOT setup
IP filter setting