Mitsubishi Electric GOT SIMPLE GS2107-WTBD, Руководство пользователя

Страница: 44 / 292

6 - 2
6.2 Panel Cutting Dimensions
6.2 Panel Cutting Dimensions
Cut holes in the following dimensions on the panel.
Ensure 10mm of space in upper and lower parts of the panel for mounting fixtures.
• Horizontal format (If the vertical format is selected, the dimension must be rotated 90 degrees.)
6.3 Mounting Position
When mounting the GOT, the following clearances must be maintained from other structures and devices.
• Horizontal format (If the vertical format is selected, the dimension, which is rotated 90 degrees clockwise looking from the
display section side, is required.)
*1 Vertical Format....50mm (1.97") or more
*2 Vertical Format....80mm (3.14") or more
Installation Environment A, D [mm] (inch) B [mm] (inch) C [mm] (inch) E [mm] (inch)
In the presence of radiated-noise or heat-generating equipment nearby
50mm (1.97")
or more
80mm (3.14")
or more
*1
50mm (1.97")
or more
*2
100mm (3.94")
or more
In the absence of radiated-noise or heat-generating equipment nearby
20mm (0.79") or
more
20mm (0.79")
or more
20mm (0.79")
or more
20mm (0.79")
or more
A
+2
-0
10 (0.4") or more
10 (0.4") or more
Unit: mm (inch)
Panel thickness: 1.6 to 4mm
(0.06" to 0.15")
B
+2 -0
GS2110-WTBD
GS2107-WTBD 191 (7.52") 137 (5.4")
258 (10.16") 200 (7.88")
A B Item
B
A
C D
E
Panel thickness: 1.6 to 4mm