Mitsubishi Electric FX5-DP-M, Руководство пользователя

Страница: 51 / 176

7 PARAMETER SETTINGS
7.2 Module Parameter
49
7
7.2
Module Parameter
This section describes the "Module parameter" window of the GX Works3.
[Navigation window]  [Parameter]  [Module Information]  [FX5-DP-M]  [Module Parameter]
Precautions
After the "Module Parameter" screen is displayed, make sure to update the PROFIBUS labels. (

Page 50 Update of
PROFIBUS Labels)
Name Item Description Setting
Basic
setting Consistency Sets the I/O data exchange method. (

Page 35 Data Consistency Function)
• Disable: Disables the data consistency function.
• Enable (Use Autorefresh): Enables the data consistency function.
Configure the refresh settings of "Master Settings" under "Setup Tasks" in the
"PROFIBUS Configurator Tasks" window. (

Page 58 Setup Tasks)
• Disable
• Enable (Use
Autorefresh)
(Default: Disable)
Application
setting CPU Error Output Mode
Setting Sets the FX5-DP-M status when a CPU module stop error occurs. (  Page 37
Output Setting Function for CPU Stop Error)
■ Clear
• The data exchange with DP-Slaves are interrupted.
• The output data in the buffer memory of the FX5-DP-M are cleared and not sent.
• When the CPU module stop error occurs, the input data received from DP-Slaves
are held in the buffer memory of the FX5-DP-M.
■ Hold
• The data exchange with DP-Slaves are continued.
• The output data in the buffer memory of the FX5-DP-M are held when the CPU
module stop error occurs and then sends the data to the DP-Slaves.
• The input data received from DP-Slaves are updated into the buffer memory of the
FX5-DP-M.
• Clear
• Hold
(Default: Clear)
Refresh
setting Refresh Timing Sets the refresh timing. At the Execution Time of
END Instruction (fixed)
Refresh Group Specifies the refresh group of the program. 1 (fixed)