Mitsubishi Electric FR-LU08, Инструкция по эксплуатации

Страница: 38 / 53

38
MENU
3.2.6 USB memory
Parameter settings and projects of the PLC function can be copied from and written to a USB memory device, and verified.
NOTE
• [INV] on the monitor display indicates the inverter.
• [PLC] on the monitor display indicates the programmable controller.
(1) Copying parameter settings to a USB memory device
• To copy parameter settings as a new file (numbered)
1
Connect the FR-LU08(-01) and a USB memory device to the
source inverter.
2
Display the Function menu, turn to move the cursor to
[USB Memory Device], and press .
3
Turn to move the cursor
to [USB Parameter Copy], and
press .
4
Turn to move the cursor
to [AutoNumberedNewFile],
and press . (If [File Name
Select] has been selected, a
file number selection screen
appears.)
(SET)
BACK S E T N E X T
USB Memory Device
USB Parameter Copy
PLC Project Copy
SET
STOP PU
(SET)
BACK S E T N E X T
USB Parameter Copy
AutoNumberedNewFile
File Name Select
SET
STOP PU
(SET)
5
A confirmation screen appears
for execution.
6
Press to execute the copy.
BACK X T
AutoNumberedNewFile
1 : Copy INV to USB
SET : Execution
BACK : Cancel
SET
STOP PU
(SET)
S E T N E X T
USB Pr. Copy: CP001
1 : Copy INV to USB
B A C K S E T N E X T
USB Pr. Copy: CP001
Reading is completed
- - - S T O P P U
- - - S T O P P U
The file number is automatically
assigned from the inverter.
Please Wait