Mitsubishi Electric FR-A700 Series, Техническое руководство

Страница: 312 / 550

346
PARAMETER
(1) Monitor description list [Pr. 52, 54, 158*, 306*, 310*, 838*]
564
Operating time
carrying-over times
0
0 to 65535
(reading only)
The numbers of operation time
monitor exceeded 65535h is
displayed. Reading only
{ { { {
891
Cumulative power
monitor digit shifted
times
9999
0 to 4
Set the number of times to shift
the cumulative power monitor
digit
Clamps the monitor value at
maximum.
{ {
—
{
9999
No shift
Clears the monitor value when
it exceeds the maximum value.
[Pr. ] Name
Initial
Value
Setting Range Description
Available Inverters
A700 F700 E700 D700
*The above parameters allow its setting to be changed during operation in any operation mode even if [ Pr. 77 Parameter write selection = 0]
(initial value).
(*[ Pr. 838 ] is not available for .)
(*[
Pr. 158, 838
] are not available for .)
(*[ Pr. 158, 306, 310, 838 ] are not available for .)
F700
E700
D700
Types of
Monitor
Increments
[Pr. 52] Setting [Pr. 54]
(FM)
[Pr. 158]
(AM)
[Pr. 306]
[Pr. 310]
[Pr. 838]
Setting
Full-scale Value Description
Available Inverters
DU
(Operation
panel)
LED
PU
main
monitor
Output
frequency
0.01Hz 0/100 1
*14
[
Pr. 55
]
Displays the inverter output
frequency
{ { { {
Output current
0.01A/
0.1A
*7
0/100 2 [
Pr. 56
]
Displays the inverter output current
effective value
{ { { {
Output voltage 0.1V 0/100 3
200V class: 400V
400V class: 800V
Displays the inverter output voltage { { { {
Fault or alarm
indication
— 0/100
×
— Displays 8 past faults individually { { { {
Frequency
setting
0.01Hz 5 *1 5 [
Pr. 55
] Displays the set frequency { { { {
Running speed 1(r/min) 6 *1 6
*14
The value
converted with the
[
Pr. 37
] value from
[
Pr. 55
].
Displays the motor speed (according
to the [
Pr. 37
,
Pr. 144
] setting.
Running speed is the actual speed
detected by the encoder during
encoder feedback control and vector
control. Refer to page 343 for
details.)
{ { — —
Motor torque 0.1% 7 *1 7
*15
[
Pr. 866
]
Rated torque of
applied motor x 2
Displays the motor torque in % on
the assumption that the rated motor
torque is 100%
(displays 0% during V/F control)
{ — { —
Converter
output voltage
0.1V 8 *1 8
200V class: 400V
400V class: 800V
Displays the DC bus voltage value
{ { { {
Regenerative
brake duty
0.1% 9 *1 9 [
Pr. 70
] Brake duty set in [
Pr. 30
,
Pr. 70
]
{ { { {
A700 F700 E700 D700
A700
E700