Mitsubishi Electric F940, Руководство по оборудованию

Страница: 68 / 112

F940GOT-SWD-E/LWD-E Startup 3.
3-2
3.1 Startup procedure
This paragraph describes the startup procedure from turning on of the power of the GOT to
selection of the mode.
•Perform wiring of the power supply unit of the GOT.
(Refer to Section 2.)
•Connect the GOT and the PLC with an optional connection
cable.
•Turn on the power of the GOT. When the power is turned on
while the upper left corner (which functions as a touch key)
of the screen of the GOT is pressed and held for 1 second or
more, the SET-UP MODE screen is displayed.
(Refer to "3.2 Operation environment setting".)
•The OPENING SCREEN screen indicating the model name,
etc. is displayed for the period set in "OPENING SCREEN"
on the SET-UP MODE screen.
•On the SET-UP MODE screen, set the used mode, the con-
nected PLC name, etc.
The operation environment can be set on the OTHER
MODE screen.
Perform wiring of the
power supply unit of the GOT.
Connect the PLC.
Turn on the
power without
pressing the
touch key.
Turn on the
power while
pressing the
touch key.
The OPENING SCREEN is displayed.
The SET-UP MODE screen
is displayed.
1