Mitsubishi Electric EMU4-CNT-MB, Руководство пользователя

Страница: 127 / 136

126
13.4 Specifications of Control Unit Engineering Tool
Item Details
Model EMU4-KNET
Basic
specification
Language Japanese, English, Simplified Chinese
Setting
function Maximum
registration
number System
20 system per project
Terminal
32 terminals: 1 parent terminal and 31 child terminals per system
*Each terminal is connected together via MODBUS RTU communication.
Control method
Set the control method on a system basis.
・
Interlocking control
・
Compressor control
・
Schedule control
Control period
Execute output control every minute.
Communication setting
MODBUS RTU communication (Slave address, baud rate, etc.)
Network settings (IP address, subnet mask, etc.)
Terminal setting
Write/Read settings to/from the terminal, collation function
Logging unit setting Set the logging ID to the terminal, delete the logging data.
Clock setting
Set the clock to the terminal.
Password setting
Set the communication password for each terminal
F/W update
Update the firmware version of the terminal.
For the version after update, refer to
Version History of control Unit Engineering Tool
below.
Monitoring
function Measurement value
monitoring
Display the measurement values of the extension unit connected to the terminal
Control monitoring
Display the control status (contact output/analog output) of each terminal for each
system.
Connection check
Check the communication status for each system.
Manual control
Manually switch the control status (contact output/analog output) of each terminal
Collection
function
Event log output
Collect the event logs from the terminal
13.5 Version History of Control Unit Engineering Tool
Version Changes Note
1.0.0 - (First edition)
13.6 Specifications of Lithium Battery
Item Details
Model name EMU4-BT
Type Lithium manganese dioxide battery
Nominal voltage 3 V
Capacity 220 mAh
Weight 9 g