Mitsubishi Electric CC-Link IE Field NZ2GF12A-60IOLH8, Руководство пользователя

Страница: 48 / 162

46
6 Parameter Setting
6.1 CC-Link IE Field Network Parameter Setting
The points of "RWw/RWr Setting" can be increased/decreased in increments of four points. Decreasing the
points of "RWw/RWr Setting" shortens the link refresh time when some remote register areas are not used.
4.
Close the "CC IE Field Configuration" window.
[CC IE Field Configuration]  [Close with Reflecting the Setting]
Precautions
■ Precautions before parameter settings
For the precautions before parameter settings, refer to the following.

GX Works3 Operating Manual

GX Works2 Version 1 Operating Manual (Common)
■
Precautions for parameter settings
• When using the IO-Link module, always enable the station-based block data assurance. When it is disabled, correct
operation of the IO-Link module cannot be guaranteed. For details on the block data assurance per station, refer to the
following: User's manual for the master/local module used.
• Do not set the parameter using the CCPASET instruction in the master station. Correct operation of the IO-Link module
cannot be guaranteed because the module operates with the station-based block data assurance disabled when the
CCPASET instruction is executed. (The CCPASET instruction is intended to configure parameters for a master/local
module. For details on the CCPASET instruction, refer to the user's manual for the master/local module used.)