Mitsubishi Electric AnyWire ASLINK, Руководство пользователя

Страница: 155 / 200

APPX
Appendix 3 Remote Buffer Memory
153
A
Number of word data points setting per frame
■
Address
■ Description
Set the number of points to be stored in one frame of AnyWireASLINK transmission frame.
The word data use setting and the relationship between setting and setting value are as follows.
If Word data use setting (address: 0101H) is 0000H (Not use), set this setting to 0000H (Not use) also.
The settings that can be set differ depending on the word data use setting. The number of word points that exceeds the word
points setting cannot be set.
If Module parameter reflection request flag (RYC) is turned on after writing anything other than the above, Number of word
data points per frame setting range error (error code: 1805H) is displayed. Also, the setting will not be reflected in the non-
volatile memory.
If Module parameter reflection request flag (RYC) is turned on after writing a combination other than the one that can be set,
Word data setting combination error (error code: 180DH) is displayed. Also, the setting will not be reflected in the non-volatile
memory.
The combinations that can be set are the same as those for the word data use setting.

Page 151 Word data use setting
Startup operating mode setting
■
Address
■ Description
Set whether to acquire slave module information at start-up.
The relationship between setting and setting value is as follows.
If Module parameter reflection request flag (RYC) is turned on after writing anything other than the above, Startup operation
mode setting range error (error code: 1806H) is displayed. Also, the setting will not be reflected in the non-volatile memory.
Name Address
Word data points setting per frame 0105H
Setting Setting value
Not use 0000H (initial value)
2 words (input 1 word, output 1 word) 0001H
4 words (input 2 words, output 2 words) 0002H
8 words (input 4 words, output 4 words) 0003H
16 words (input 8 words, output 8 words) 0004H
32 words (input 16 words, output 16 words) 0005H
Name Address
Startup operating mode setting 0107H
Setting Setting value
Without slave module information acquisition 0000H (initial value)
With slave module information acquisition 0001H