Mitsubishi Electric 800 Series, Инструкция по эксплуатации, Страница: 393 / 727

(T) Multi-Function Input Terminal Parameters
392
PARAMETERS
5.12
(T) Multi-Function Input Terminal
Parameters
Purpose Parameter to set
Refer to
page
To inverse the rotation direction
with the voltage/current analog
input selection (terminals 1, 2, and
4)
Analog input selection P.T000, P.T001 Pr.73, Pr.267 393
To assign functions to analog
input terminals Terminal 1 and terminal 4
function assignment
P.T010, P.T040 Pr.858, Pr.868 397
To adjust the main speed by the
analog auxiliary input
Analog auxiliary input and
compensation (addition
compensation and
override functions)
P.T021, P.T031,
P.T050, P.T051
Pr.73, Pr.242,
Pr.243, Pr.252,
Pr.253
398
To eliminate noise on analog
inputs
Analog input filter P.T002 to P.T007
Pr.74, Pr.822,
Pr.826, Pr.832,
Pr.836, Pr.849
400
To adjust analog input frequency/
voltage (current) (calibration) Frequency setting voltage
(current) bias and gain
P.T100 to P.T103,
P.T200 to P.T203,
P.T400 to P.T403,
P.M043 Pr.125, Pr.126,
Pr.241, Pr.902 to
Pr.905, Pr.917,
Pr.918
402
To adjust analog input torque/
voltage (current) (calibration) Torque setting voltage
(current) bias and gain
P.T110 to P.T113,
P.T410 to P.T413,
P.M043 Pr.241, Pr.919,
Pr.920, Pr.932,
Pr.933
407
To continue operating at analog
current input loss
4-mA input check P.T052 to P.T054
Pr.573, Pr.777,
Pr.778
411
To assign functions to input
terminals Input terminal function
selection P.T700 to P.T711,
P.T740 Pr.178 to Pr.189,
Pr.699
415
To change the input specification
(NO/NC contact) of input signals
Output stop signal (MRS)
input selection
P.T720 Pr.17 418
Inverter run enable signal
(X10) input selection
P.T721 Pr.599 609
Power failure stop external
signal (X48) input
selection
P.T722 Pr.606 526
To enable the second (third)
function only during the constant
speed
RT signal application
period selection
P.T730 Pr.155 419
To assign start and forward/
reverse commands to different
signals
Start signal (STF/STR)
operation selection
P.G106 Pr.250 421