MITSUBISHI ELECTRIC 1100B SERIES UPS
1100B SERIES UPS
OWNERS / TECHNICAL MANUAL
Page Number:
2-2
2.2.1
MENU
Refer to Figure 2.26 for the SCREEN MENU tree.
A) MAIN MENU (Figure 8)
The LCD panel indicates power flow and measured values, while also showing the start/stop
function. The LCD panel also allows the user to verify the status and operation of the UPS
Module.
Figure 8
Main Screen
The following will be displayed when the START/STOP key on the SCREEN SELECT MENU
(Figure 2.5) is pressed (in the
OPERATION MENU
):
1) Startup/Shutdown Guidance
(Figure 9, Figure 10)
This display indicates the Startup and Shutdown guidance for the UPS system. If this
operation is PIN protected, the user is required to enter the security PIN before the screen
can be accessed.
When in remote mode, the message “REMOTE operating model” will appear on this
screen. The user cannot operate the start and stop functions without changing the setup
from remote mode to local mode.
When bypass voltage is abnormal, the message “Bypass voltage abnormal” will appear.
- Stop:
When the bypass voltage is abnormal, the user cannot transfer from inverter to
bypass line.
Figure 9
Startup Guidance
Figure 10
Shutdown Guidance
Follow Startup/Shutdown guidance accordingly.
2) SCREEN SELECT MENU
(Figure 11)
This screen shows all screen menus.
Figure 11
Screen Select Menu
Содержание 1100B Series
Страница 2: ...Preface ...
Страница 64: ......
