Mitox CS62 Select, Руководство оператора

Страница: 26 / 40

CS62 / CS64 SELECT Chainsaw
26
Original Instructions Version July 16
CS62-64_130716
Service Schedule
Troubleshooting: Power loss or engine stopping.
• Check that the fuel tank is not empty.
• The mixture does not reach the carburettor. Change the fuel filter in the fuel tank.
• There is water in the mixture. Drain then clean the fuel system.
• The air filter is dirty. Clean the air filter.
• There are carbon deposits in the cylinder exhaust pipe or muffler. Clean or change muffler.
• Spark plug is worn: Replace spark plug.
Component Procedure
Before
Use
Every
25
Hours
Every
50
Hours
Every
100
Hours
Note
Fuel Leaks / Fuel
Spillage Wipe away
•
Fuel Tank / Fuel
Filter Inspect / Clean
• •
Replace if
Neccessary
Idle Adjusting
Screw See Adjusting
Carburettor
•
Adjust if
Neccessary
Spark Plug Clean and
Readjust Plug Gap
•
Gap 0.025in (0.6-
0.7mm) Replace if
Neccessary
Cylinder Fins /
Intake Air Cooling
Vent Clean
•
Muffler / Spark
Arrestor / Cylinder
Exhaust Port Clean
•
Throttle Lever /
Ignition Switch Check Operation
•
Air Filter Clean •
Screws / Nuts /
Bolts Tighten / Replace
• •
Except Adjusting
Screws
Oiling Port Clean •
Guide Bar Clean •
Sprocket Inspect / Replace •
Saw Chain Inspect / Sharpen •