280BVX Blower/Vacuum
7
Original Instructions Version July 15
11) Ensure the machine does not come into contact with foreign bodies and possible flying debris
and dust being thrown up by the air; do not direct the air jet in the direction of people or animals.
12) When used as a blower always pay the utmost attention to prevent removed material or dust
from injuring people or animals or damaging property.
A
lways assess wind direction and never
work against the wind.
A
lways extend the blower tube correctly so that the air flow works close
to the earth.
13) Never insert objects into the vacuum inlet (when being used as a vacuum collector) and avoid
the intake of large objects that could damage the rotor.
14) During use keep your hands well away from the intake grille and from the air outlet and do
not obstruct the air vents.
15) Stop the engine:
• when mounting or removing accessories for blowing or collecting;
• whenever you leave the machine unattended;
• before refuelling;
• when moving between work areas.
16) Stop the engine and disconnect the spark plug cable:
• before checking, cleaning or working on the machine;
• after the intake of a foreign body. Inspect the machine for any damage and make repairs before
restarting it again;
• if the machine starts to vibrate abnormally (find and remove the cause of the vibration
immediately);
• when the machine is not in use.
17) To avoid the risk of fire, do not leave the machine with the engine hot on leaves, dry grass or
other inflammable material.
18) W
A
RNING – If something breaks or an accident occurs while working, turn off the engine
immediately and move the machine away to prevent further damage; if an accident occurs with
injuries or third parties are injured, carry out the first aid measures most suitable for the situation
immediately and contact the medical authorities for any necessary health care. Carefully remove
any debris that might cause damage or harm persons or animals should they not be seen.
19) W
A
RNING The noise and vibration levels shown in these instructions are the maximum levels
for use of the machine. Insufficient maintenance has a significant impact on vibration and noise
emissions. Consequently, it is necessary to take preventive steps to eliminate possible damage
due to high levels of noise and stress from vibration. Maintain the machine well, wear ear
protection devices, and take breaks while working.
20) Rotating parts can cause serious injury, avoid contacting the rotating parts when they are still
rotating.
21) Don't operate the machine near open windows.
22) Operating the machine with a stable speed and gripping the handle firmly with suitable
force can decrease the vibration level. Low engine speed means low-noise level, so operate the
machine at the lowest engine speed necessary to accomplish the task. During a working day, you
should take frequent and adequate breaks to prevent damage from vibration and damage to the
ears.
