background image

280BVX Blower/Vacuum

18

Original Instructions Version July 15

6. WARRANTY WORK

This work must be done exclusively by your Dealer. All and any operations performed in 
unauthorised centres or by unqualified persons will totally invalidate the warranty.

6.1 FUEL FILTER

Inside the fuel tank there is a filter which prevents impurities from entering the engine.
The filter should be replaced once a year by your Dealer.

6.2 CARBURETTOR ADJUSTMENTS

The carburettor is tuned by the manufacturer to achieve maximum performance in all situations, 
with a minimum emission of toxic gas in compliance with the regulations in force. In the case of 
poor performance contact your Dealer for a check of the carburation and engine.

7. DIAGNOSTICS

What to do when...

Source of problem

Corrective action

Source of problem

Corrective action

1. The engine will not start or will not
keep running

3. The engine runs irregularly and lacks in power 
when revved

Incorrect starting
procedure

Follow the instruc-
tions
(see chapter 3)

Dirty spark plug or
incorrect distance
between the 
electrodes

Check the spark plug
(see chapter 5)

Dirty spark plug or
incorrect distance
between the 
electrodes

Check the spark 
plug
(see chapter 5)

Carburation 
problems

Contact your Dealer

Air filter clogged

Clean or replace the
filter (see chapter 5)

Bag full or clogged

Empty the bag (see
chapter 4)

Carburation 
problems

Contact your Dealer

4. The engine makes too much smoke

Intake grille open
without having
mounted the first
vacuum tube

Close the grille or
mount the first
vacuum tube (see
chapter 1)

Incorrect 
composition
of the fuel 
mixture

Prepare the fuel
mixture according to
the instructions (see
chapter 2)

Blower or vacuum
tube not fitted

Fit the tube

Carburation 
problems

Contact your Dealer

2. The engine starts but is lacking in power

5.The machine starts to vibrate abnormally

Air filter clogged

Clean or replace the 
filter 
(see chapter 5)

Damaged or 
loose parts

Stop the machine and 
disconnect the spark plug 
cable. Inspect for damage. 
Check for and tighten 
any loose parts. Have all 
checks, repair work and 
replacements carried out 
by a specialized Dealer 
only.

Carburation 
problems

Contact your Dealer

Содержание 280BVX





























Отзывы: