background image

15

Original Instructions Version May 16

 

280BVX/260BX_130516

3

IMPORTANT

 When using the machine as a vacuum collector, there is a risk of inadvertently 

suctioning objects which can obstruct the machine and block the rotor. In this case:
– switch the motor off immediately
– Disconnect the spark plug cap
– disassemble the vacuum tube
– remove the foreign body from inside the vacuum inlet
– Check that nothing is blocking the rotor before using the machine again.

IMPORTANT

 Overfilling the bag reduces the machine's efficiency and could cause the 

engine to over heat.

4.3 END OF OPERATIONS

When you have finished your work:
– Switch off the engine as indicated above (Chap. 3.3)
– Disconnect the spark plug cap

Correct maintenance is essential to maintain the original efficiency 
and safety of the machine over time. 

During maintenance operations:

– Remove the spark plug cap
– Wait until the engine is sufficiently cold
– Wear protective gloves
– Do not work on the machine if not in possession of the necessary skills and tools

5.1 STORAGE

After every working session, clean the machine thoroughly to remove all dust and debris, and 
repair or replace any faulty parts. The machine must be stored in a dry place away from the 
elements.

5.2 CYLINDER AND SILENCER

To reduce overheating & fire risks, periodically clean the cylinder fins with compressed air and 
clear the silencer area from dust, leaves or other debris.

5.3 STARTING SYSTEM

To avoid overheating and damage to the engine, always keep the cooling air vents clean and free 
of sawdust and debris. The starter rope must be replaced as soon as it shows signs of wear.

5. ROUTINE MAINTENANCE

260BX Premium Blower

280BVX Premium Blower/Vacuum

 

Содержание 260BX Premium





























Отзывы: