background image

260B Blower / 280BV Blower Vacuum

3

Original Instructions Version July 12

PRODUCT DESCRIPTION

This Blower/Vacuum is a 2 stroke fast running power tool and is designed to be used in 
a domestic application for vacuuming leaves and cut lawn.  It can be easily converted 
into a blower.

Important

 

 
The information contained in this manual describes machines available at the time of production. While 
every attempt has been made to give you the very latest information about your BV280, there may be 
some  differences between your machine and what is described here .We reserve the right to make changes 
in  production without prior notice, and without obligation to make alterations to machines previously 
manufactured.
Before using this product, consult local regulations concerning noise restrictions and hours of operation.

• 

This product has been designed to be used as a Blower/Vacuum power tool as described    

 

previously and it should never be used for any other purpose; doing so could result in unforeseen  

 

accidents and injuries occurring.  Only approved Mitox accessories should be used with this  

 product.

• 

This Blow/Vac is equipped with extremely sharp blades, always wear sturdy gloves when handling  

 

the blades and fit the safety guards when not in use. 

• 

When using the Blow/Vac, grip the handles firmly with both hands, place your feet slightly apart  

 

so your weight is distributed evenly across both legs, and always maintain a steady even posture  

 

while working.  Do not use on ladders or if the ground surface is slippery or uneven.

Work Clothing and Safety Equipment

 

 

When using the product, you should wear proper clothing and protective equipment:

• 

 Helmet 

• 

 Protection goggles or face protector

• 

 Ear protectors

• 

 Thick work gloves

• 

 Non-slip sole work boots

• 

 When using your blower, always wear strong, durable,  work clothing; shirts should be long- 

 

sleeved and trousers should be full-length. No loose clothing / ties or jewellery.

• 

Dust mask

 

Содержание 260B



























Отзывы: