Mitox 260B, Руководство оператора

Страница: 20 / 26

260B Blower / 280BV Blower Vacuum
20
Original Instructions Version July 12
Every 10/15 Hours Use
1. Use the spark plug wrench to remove the spark
plug (turn counter-clockwise to remove).
2. Clean and adjust the spark plug gap to
0.6~0.7mm. Replace any damaged or visibly worn
plug with a champion RCJ6Y or equivalent.
3. Install the spark plug finger-tight in the cylinder
head, and then tighten it firmly with the spark plug
wrench. If a torque wrench is available, torque the
spark plug to 148-165 inch pounds.
Every 50 Hours Use
(MORE FREQUENTLY IF YOU NOTE REDUCED PERFORMANCE)
INSPECTION Inspect the entire machine and
tubes for damage, including loose or missing
components, and repair as necessary.
SPARK PLUG Replace the spark plug with a
champion L9T(LD) , gapped to( 0.6~0.7)mm.
FUEL FILTER Use a wire hook to extract the fuel filter
from inside the fuel tank, and then remove and
wash the filter element in clean fuel.
Before reinstalling the filter, inspect the condition
of the fuel line. If damage or deterioration is noted,
the vacuum should be removed from service until
it can be inspected by a trained service technician.
COOLING SYSTEM Remove the engine cover (as described under “Spark Arrestor”), and use a wood or plastic
scraper and a soft brush to remove dirt and debris from the cylinder fins and crankcase.