Mitel SX-200 ICP - 1.0 5020, Руководство техника

Страница: 71 / 360

63
Basic Installation
Door Phone/Door Opener
Customer-provided door phone units (up to four) can be connected to ONS
ports to provide two-way communication between an entryway and
designated extensions. Door entry is controlled by the general-use relays
in the controller—two on the AMB and two on the AOB. Each relay
connects to an electric lock that is operated by key presses at the
designated extension(s). See Table 7, “MOH, Pager, Generic Relay
Pinouts,” on page 62 for connector pinouts.
The relay contacts are rated at 90mA @60 Vac or Vdc peak and are
normally open.
CDE Programming
1. In Form 18, assign an extension number to a Door Relay.
2. In Form 09, enter the Door Relay extension number from Form 18 into
the ASSOC field of the ONS door phone. Assign the door phone a
Name (e.g., Door Phone) to identify it on the door answerer’s display.
3. In Form 19, assign the door phone to its own tenant group and
program Station Dial 0 Routing to direct calls from the door phone to
an answering position.
4. (Optional) Program an Open Door feature key to the door answering
phones.
5. Set COS Option 115 in the door phone’s COS to ring the door
answerer the required length of time (default - 30 seconds).