Mitel SX-200 ICP - 1.0 5020, Руководство техника

Страница: 103 / 360

95
Basic Programming
Programming Stations/Sets Automatically
The AUTO PROGRAM function in Form 09, Desktop Device Assignments,
checks for unprogrammed circuits in the system and programs them as
follows:
• Extension numbers are automatically assigned according to a Bay,
Slot, Circuit address format “BSCC”, where
- B is the Bay number (1-8)
- S is the slot number (1-8)
- CC is the cct number (01-12).
The system prompts for a starting extension number.
• Other parameters assigned to ONS devices:
- COS = 2
- COR = 1
- Tenant = 1
• Other parameters assigned to IP sets:
- COS = 1
- COR = 4
- Tenant = 1
To automatically program all connected sets
1. Connect the sets.
2. Access Form 09, Desktop Device Assignments.
3. Press Auto Program.
The system prompts for an extension number to assign to the first
auto-programmed extension. The number is incremented by one for
each subsequent extension—for example, 100, 101, 102.
4. Enter a starting extension number.
Conflicts with existing extension numbers result in an error message
and a prompt to press the CONTINUE or ABORT softkey.
Auto-programming will not proceed to the next BAY/SLT/CCT until a
valid extension number has been found for the current position.