Mitel SmarT-1 380-003-FBCLXX Скачать руководство пользователя страница 27 | Manualshive

Страница: 27 / 94

background image

General Notes on Programming

8380-383-115-BA
Issue 2, June 1999

26

CHAPTER 6

6. General Notes On Programming

6. 1. Local Programming With an MF4 Telephone

MF4 tones can be used to program the SMarT-1 EuroRoute One-line Dialer. The programming
code is #0

✳

(Register 609) for all country-specific defaults. To exit programming mode and

save data, dial 987, then hang-up. Going on-hook without using the 987 command to exit from
programming mode or remaining inactive in programming mode for more then two minutes
will cause the Dialer to quit programming mode without saving changes, as will dialling the
command 986.

Carrier tone will be heard for the duration of the 011 register (refer to Appendix 2 for the
country-specific defaults) before MF4 programming mode is entered. Setting the 011 register
to a value of 0 will disable the modem and allow you to enter MF4 programming mode
directly.

Note: Do not disconnect the power from the Dialer, until at least 10 seconds have expired after
exiting programming mode. During this period, any programming in the Dialer is being stored
into the Dialer’s memory. Disconnecting the power prematurely will result in a loss of
programming, and a checksum error (Refer to page 12).

6. 2. Terminating Variable Length Entries

To terminate a variable length entry (Abbreviated Dialling, Cost Centre Codes, 6rX strings,
etc.) use ##. The entry will be made automatically if you do not enter the ## within the time
specified by the interdigit timer (Register 111: refer to Appendix 2 for the country-specific
defaults).

6. 3. Acknowledgment Tones

While programming the Dialer with an MF4 telephone, you will hear tones that indicate
correct entries, incorrect entries and programming time-outs. In general, after each correct
entry, the Dialer will respond with two tones.

If You Hear

means that the command you have entered has been recognised as being valid (correct), i.e.

you entered # 0

✳

.

If You Hear

means that the entry you have made has been accepted. This occurs after a parameter has
received all the digits it needs to complete programming, or if you have entered ## on a
variable length parameter. For example: if you dial 100 you will hear

, if you then dial 2 you

will hear

.

«
...
25
26
27
28
29
...
»

Содержание SmarT-1 380-003-FBCLXX































































































Отзывы:

Нет отзывов

Похожие инструкции для SmarT-1 380-003-FBCLXX

Бренд: NEFFOS Страницы: 32

Бренд: Pantech Страницы: 2

Бренд: N-Com Страницы: 32

Бренд: Starmobile Страницы: 53

Бренд: Docomo Страницы: 469

Бренд: TCL Страницы: 74

Бренд: i-onik Страницы: 5

Бренд: Aquos Phone Страницы: 88

Бренд: Sony Ericsson Страницы: 30

Бренд: Blackberry Страницы: 30

Бренд: OfficeServ Страницы: 63

Бренд: PolySony Страницы: 4

Technophone PC200

Бренд: Audiovox Страницы: 12

Бренд: Zte Страницы: 116

MultiPhone PAP4505DUO

Бренд: Prestigio Страницы: 4

Бренд: Hitachi Страницы: 10

Бренд: Hitachi Страницы: 5

Бренд: Hitachi Страницы: 72

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды