Mitel Single-Line, Руководство пользователя, Страница: 20 / 41

Mitel ® Single-Line Phone User Guide – Issue 13, September 2009
Page 9
Answering and Placing Calls
Redialing a Number
You can quickly redial the last external number dialed. Although most phones are programmed
to redial the last number dialed, your system administrator can program your phone to redial the
last number saved. You cannot redial extension numbers.
To use Redial:
Lift the handset, and then dial 380. The system automatically selects a line and dials the
number.
To use the Last Number Saved feature:
•
To save the last number dialed: Lift the handset, and then dial 380.
•
To redial the saved number: After selecting a line, perform a hookflash, and then dial 380.
The number is redialed automatically.
Using Speed Dial
You can use speed dial to quickly dial stored phone numbers. Speed-dial numbers are either
stored in the system (System Speed Dial), or in your phone (Station Speed Dial) and are
identified by a location number. Once programmed, you can quickly dial these numbers by
entering a feature code and dialing the desired location number.
Using System Speed Dial
Your system administrator assigns Speed-Dial location numbers, which are available to
everyone in the system. Contact your system administrator for more information.
To Dial System Speed-Dial numbers:
1. Lift the handset and select an outside line.
2. Perform a hookflash, and then dial 381.
3. Dial the speed-dial location (000 to 999 or 0000 to 4999).