Mitel MIVOICE OFFICE 250 Скачать руководство пользователя

Страница: 582 / 585

MiVoice Office 250 Installation and Administration Guide

554

Upgrade the 8690 Manually

Although the 8690 automatically checks for upgrades, you can manually upgrade the 8690 by

running the Auto Upgrade feature. If there are no new upgrades available, you will not be notified,

and your phone will function normally. If there is an upgrade available, the Software Upgrade dialog

box opens, and you are prompted to install the upgrade. You can choose to install the upgrade

immediately by pressing

or set a reminder to install it later.

To run the Auto Upgrade feature:

Press the System Tray icon, then press Advanced – Auto Upgrade

–

Check for New Versions

The upgrade search dialog box opens.

Press

to allow the system to search for software upgrades. You are

not

informed if upgrades

are

not

available.

In addition to running the Auto Upgrade feature, you can view, install, or cancel pending upgrades

using the Advanced options.

To view and install pending upgrades:

Press the System Tray icon, then press Advanced – Auto Upgrade

–

Pending Upgrades

. The

Pending Upgrades dialog box opens and displays the status for the following:

•

Firmware

•

Client Application

•

Operating System

The Upgrade Now option indicates a pending software upgrade.

Press

Upgrade Now

next to the upgrade you want to install. There is one button for each

upgrade type.

When the Software Upgrade dialog box opens, press

to install the upgrade.

To cancel pending upgrades:

Press the System Tray icon, then press Advanced – Auto Upgrade

–

Pending Upgrades

. The

Pending Upgrades dialog box opens and displays the status for the following:

•

Firmware

•

Client Application

•

Operating System

NOTICE

Possible Phone Inoperability.

The 8690 does not have a built-in hard drive. Storage memory

will

not

survive a reset or an upgrade to the operating system unless the files are stored in the

Mounted Volume folder on the phone (My Computer\Mounted Volume) or on a host that is acces

sible from the 8690. Desktop shortcuts, and any preferences that have not been saved in the reg

istry (including UC preferences) will be lost if you upgrade the operating system or if the phone

resets. If you attempt to use the phone while an upgrade is in progress, the phone may be ren

dered unusable.

Содержание MIVOICE OFFICE 250










































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание MIVOICE OFFICE 250

Отзывы:

Похожие инструкции для MIVOICE OFFICE 250

Бренды по названию

Популярные бренды

Mitel MIVOICE OFFICE 250, Руководство по установке и администрированию

Результаты поиска

Содержание MIVOICE OFFICE 250

Отзывы:

Похожие инструкции для MIVOICE OFFICE 250

Бренды по названию

Популярные бренды