manualshive.com logo in svg

Mitel MiVOICE 6930, Руководство пользователя

Поделиться
Скачать
Mitel MiVOICE 6930 Скачать руководство пользователя страница 61

Mitel 6930 SIP Phone User Guide

lxii

Bluetooth

The Mitel 6930 SIP IP phone supports MobileLink, a feature that provides seamless mobile 
integration using Bluetooth wireless technology. 

The phone also supports the use of a Bluetooth headset as an alternate audio device and a cordless 
handset as an optional accessory. Using the 

Bluetooth

 settings menu, you can enable and disable 

Bluetooth functionality on your phone as required. You can also pair, connect, and unpair a Bluetooth 
device as applicable.

Note: 

For more information on how to use the MobileLink features, see

“MobileLink” on 

page clxxvii.

Notes: 

1.

The specific operation of third-party Bluetooth devices can vary by manufacturer and model. 
Ensure your Bluetooth device has been upgraded to its latest firmware revision. Refer to the 
documentation accompanying the Bluetooth device for details on operation, alerting tones, 
LEDs, and charging. Note that all Bluetooth devices will drop any call in progress if the 
maximum range is exceeded.

2.

Attempting to pair and connect using your Bluetooth device’s respective menus may cause 
connectivity issues. Follow the procedures listed in the sections below to ensure the 
connectivity of your Bluetooth device.

3.

Only one Bluetooth device of each profile (i.e. handset, headset, mobile phone) can be 
connected at one time. Connecting to a new device of the same profile will automatically result 
in the disconnection of the previous device of the same profile. If there is no connection to 
any device (within the same profile) the phone will actively look for the most recently connected 
device and will attempt to automatically reconnect. Manually disconnecting the device using 
the device’s native UI will not prevent an automatic reconnection. You must either disconnect 
using the 

Bluetooth

 menu on the Mitel 6930 SIP IP phone, "forget" the device, or the device 

must be out of range to circumvent the auto reconnect process.

4.

When using a multi-point Bluetooth headset with your Mitel 6930 SIP IP phone, do not pair 
your multi-point Bluetooth headset to multiple devices (For example, to your Mitel 6930 SIP 
phone and your mobile phone) as audio and connectivity issues may occur.

5.

Some Bluetooth headsets have a proximity sensor feature that automatically changes the 
audio path depending on whether the headset is put on or taken off. It is strongly recommended 
to disable this feature when using the respective headset with the Mitel 6930 SIP IP phone 
as it may cause audio issues. Refer to the documentation accompanying the Bluetooth device 
for information on how to disable this feature.

6.

Bluetooth headsets connected to the Mitel 6930 SIP IP phone are limited in functionality to 
answering, ending, and muting calls. Additional headset features (such as rejecting calls) are 
not supported and will cause unexpected behavior (e.g. invoking the reject call function will 
answer instead of reject).

Содержание MiVOICE 6930




















































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды