Mitel MiVOICE 6930, Руководство пользователя

Страница: 128 / 211

Making Calls
cxxix
Contact your telephone equipment retailer or distributor to purchase a compatible headset.
Volume Controls for the Headset Microphone
On the 6930, there are three options for the headset microphone volume:
Low
,
Medium
, and
High
.
For information about configuring the headset microphone volume, see “Headset” on page lxx
.
Making and Receiving Calls Using a Headset
1.
Ensure that you have selected a headset audio mode (see “Configuring the Audio Mode Using
the IP Phone UI” on page lxx .
2.
Turn the phone over and, depending on the type of headset, locate the headset jack marked
f
or the USB port.
a.
If you have a USB headset, insert the USB plug into the USB port.
b.
If you have a headset with an RJ9/RJ22 4-pin connector, insert the headset cord into the
jack until it clicks into place.
c.
If you have a DHSG/EHS headset with an RJ45 6-pin or 8-pin connector, remove the plastic
headset jack adapter and then insert the cord into the jack until it clicks into place.
3.
Press the key to obtain a dial tone or to answer an incoming call. Depending on the
audio mode selected from the Options List, a dial tone or an incoming call is received on either
the headset or the handsfree speakerphone.
4.
Press the key to end the call.
Using Intercom Functionality
On the 6930 you can use the
Icom
key to automatically connect with a remote extension.
Using the Icom Key
1.
Press the
Icom
key.
Notes:
1.
The RJ22/R45 headset port is for headset use only. Plugging any other devices into
this port may cause damage to the phone and will void your warranty.
2.
Customers should read and observe all safety recommendations contained in
headset operating guides when using any headset.
3.
Contact your System Administrator for questions regarding supported headsets.
4.
If both an analog (non-DHSG) headset and a USB headset are connected to the
phone, the USB headset will take precedence over the analog headset (i.e. the USB
headset will be functional while the analog headset will not be functional).
5.
If both a DHSG headset and a USB headset are connected to the phone and DHSG
is enabled, the DHSG headset will take precedence over the USB headset.
Note:
See the
Mitel 6930 SIP IP Phone Installation Guide
for more information.