Mitel 6930 SIP Phone User Guide
cxxii
6.
To receive RTP steams for group paging, you must also configure the
Paging Listen Addresses
parameter at the path,
Basic Settings > Preferences > Group Paging RTP Settings
. For more
information about setting this parameter, see
.
Expansion Module Keys
7.
Select from
Key 1
through
Key 84
(M695).
8.
In the
Type
field, select
Paging
.
9.
In the
Value
field, enter a multicast IP address and a port number for the Paging key. When you
press this key, the phone initiates an outgoing multicast RTP session to the specified address
using the specified port. (For example, 239.0.1.15:10000).
10.
To receive RTP steams for group paging, you must also configure the
Paging Listen Addresses
parameter at the path,
Basic Settings > Preferences > Group Paging RTP Settings
. For more
information about setting this parameter, see
.
11.
Click
Save Settings
to save your changes
Using the Paging Key
The following procedure describes the use of the
Paging
key on the IP phone. The procedure
assumes you have already configured the
Paging
key using the Mitel Web UI.
1.
On the IP phone, press the softkey or expansion module key you configured for
Paging
.
The phone opens a multicast RTP session and an outgoing OR incoming phone screen displays.
2.
Press the
Drop
key to end the multicast RTP session and return to the
Home
screen.
Discreet Ringing Key
You can configure a
Discreet Ringing
key on the phone that when pressed allows you to toggle
on/off the Discreet Ringing feature. When the Discreet Ringing feature is enabled, if a call is incoming,
the phone will play the configured ring tone once only. All applicable visual indicators (LED for the
corresponding Line key, Message Waiting Indicator [MWI], etc...) will behave normally.
Notes:
1.
When you select
Paging
for the
Type
field, the
Line
field is disabled.
2.
The
Value
field allows for one multicast address entry only.
Notes:
1.
The recipient of a paging call can set a global DND to ignore any incoming pages.
2.
For incoming paging, the phone uses the Intercom configuration settings. The
incoming page is dependent on the
Allow Barge In
parameter setting and the
idling/on call state.
Note:
If you enable global DND on the phone, the incoming multicast RTP session is
dropped.
Note:
If a custom ring tone is selected and Discreet Ringing is enabled, the phone will
not play the custom ring tone during an incoming call. Ring tone 1 will be played once
instead.
Содержание MiVOICE 6930
Страница 1: ...Mitel 6930 SIP Phone 58015330 REV00 RELEASE 5 0 0 USER GUIDE ...
Страница 10: ...Table of Contents xi ...
Страница 211: ......