manualshive.com logo in svg

Mitel Inter-Tel Axxess, Руководство администратора, Страница: 330 / 384

Поделиться
Скачать
Mitel Inter-Tel Axxess Скачать руководство пользователя страница 330

Page  314

Voice Processing Features

Inter-Tel

® 

Axxess

® 

Administrator Guide — Issue 11.0, May 2008

Voice Mail

VOICE MAIL

The Voice Mail feature allows callers to send and receive recorded messages from any station
or DTMF endpoint. (Dial pulse signaling is not recognized by the voice processing system.
Callers using dial pulse endpoints will be routed to the Voice Mail application’s Dial-0 Desti-
nation for assistance.

VOICE MAIL AND MESSAGE NOTIFICATION/RETRIEVAL APPLICATIONS

Two types of applications are combined to provide the Voice Mail feature: Voice Mail and
Message Notification/Retrieval.

•

Voice Mail:

 This application

h a n d l e s   a l l   c a l l s   t h a t   a r e
directed to Voice Mail (other
than the Message Notification/
Retrieval application) placed
by subscribers and non-sub-
scribers. Callers will hear the
main company greeting, fol-
lowed by a menu of available
options. Stations can forward
or transfer calls directly to
their mailbox using this appli-
cation’s extension number.
This application can also be
the message center for the sub-
scribers’ stations.

•

Message Notification/Retrie-
val:

 Only one Message Notifi-

cation/Retrieval application may
be created for the system. When
station users respond to message
indications left by Voice Mail,
they reach the Message notifica-
tion/Retrieval application and
are pro mpted only for their
password.

Station users and outside callers gain
access to the Voice Mail application in
the following ways:

•

By dialing the telephone num-
b e r   o r   e x t e n s i o n   n u m b e r
a s s i g n e d   t o   t h e   Vo i c e   M a i l
application

•

By being transferred to Voice Mail by Automated Attendant

•

By being forwarded to the Voice Mail when a called station is unavailable (via the Call
Forwarding or System Forwarding features)

•

By responding to Message Waiting indications

CALL TO VOICE MAIL

Voice mail answers and plays a 
greeting followed by a menu of 
options.

Caller selects option

Caller does not 
select an option

Call is sent to selected mailbox.

Caller uses the 
directory and 
can select the 
name of 
desired party.

Call is sent to 
mailbox. Or a 
subscriber 
enters his own 
mailbox.

Call is sent to 
the Voice Mail 
designated 
dial-0 operator.

MESSAGE IS LEFT IN A MAILBOX

Voice mail leaves a message waiting indica-
tion at the station designated as the message 
notification station for the mailbox.

Station user is prompted for the 
password to his mailbox.

Station user responds to message indication 
(presses MSG button or enters feature code).

INTERCOM CALL IS PLACED TO

MESSAGE NOTIFICATION/RETRIEVAL

APPLICATION 

(Alternate Message Source)

Содержание Inter-Tel Axxess

































































































































































































































































































































































































Отзывы:

Нет отзывов