manualshive.com logo in svg

Mitel Inter-Tel Axxess, Руководство администратора, Страница: 236 / 384

Поделиться
Скачать
Mitel Inter-Tel Axxess Скачать руководство пользователя страница 236

Page  220

System Features

Inter-Tel

® 

Axxess

® 

Administrator Guide — Issue 11.0, May 2008

Call Screening

Receiving an Announced Or Screened Transferred Call:

 Depending on the Transfer

Method programmed for your mailbox or extension ID, one of the following will occur when
you receive a call transfer from Automated Attendant or Call Routing Announcement:

•

“Announce Only” Calls: 

When the caller enters your extension number, the system

asks the caller to record his or her name. The voice processing system then places a pri-
vate call to your station. When you answer, it plays 

“You have a call from (caller's

name).” 

It then completes the transfer, and the transferred call rings at your station.

Answer as usual.

•

“Screened” Calls: 

When the caller enters your extension number, the system asks the

caller to record his or her name. The voice processing system then places a private call
to your station. When you answer, it plays 

“You have a call from (caller's name),”

 and

gives you the following options:

—

To accept the call,

 press 

 

or the 

ACCEPT

 menu button. The call will ring at

your station.

—

To replay the announcement,

 press 

 

or the 

REPLAY

 menu button.

—

To send the call to Voice Mail,

 press 

 

or the 

SEND TO V-MAIL

 menu button.

The caller is transferred to your mailbox and hears your personal greeting.

—

To forward the call to another extension, 

press 

 

or the 

FORWARD

 menu but-

ton. Then enter the extension number. The call is sent to the other station. If that
station has screened or announced transfers, the caller’s name is played again for
that station.

—

To refuse the call,

 press 

 

or the 

REFUSE

 menu button, or simply hang up. The

caller receives a recording that says you are not available and offers them the
option of leaving a message.

•

“Unannounced” Calls: 

This is the default method for transferring a call. The call is

transferred to your station without any kind of announcement.

#

1

2

3

Содержание Inter-Tel Axxess

































































































































































































































































































































































































Отзывы:

Нет отзывов