
1/1553-ANF 901 54 Uen E5 2016-05-16
22
D
URING
CALLS
During the conference, conference tone will be heard.
5.7.2
TO ADD A NEW PARTY IN A CONFERENCE
•
Press the Inquiry-key or any idle line-key (Line 1 or 2).
•
Dial the new party"s extension number (inform about the conference).
•
Press the Conference-key or dial 3.
5.7.3
INTERNAL CONSULTING DURING A CONFERENCE
As a conference leader you can make an Inquiry call to one of the conference
members.
Doing this you will get busy tone and to reach him/her you must use the Intrusion proce-
dure, 5.2 Intrusion on page 20.
•
Press the Inquiry key (dial tone).
•
Dial the extension number (busy tone).
•
Press the Intrusion key or dial 4.
You will now be connected to this conference member outside the conference for
consultation. You can also release him/her from the conference.
Returning to the conference is possible as follows:
1)
Return to the conference together with the consulted conference member - dial
3.
2)
Refer back to the conference - you will return to the conference and the consulted
conference member will be disconnected from the conference.
3)
Clear the call and then refer back - the consulted conference member will be
disconnected from the conference.
4)
Make an Inquiry call - the consulted conference member will be disconnected
from the conference.
5.7.4
TO LEAVE A CONFERENCE
•
Replace the handset.
Note:
A tone burst is heard each time a participant enters or leaves the conference.
The conversation is changed back to a normal two party connection when there
is only two parties left. When the conference leader leaves the conference the
conference will continue and the first one to park the conference will be the new
conference leader.
5.8 PARKING
5.8.1 INDIVIDUAL
You can park an ongoing call temporarily and then re-admit it on your own telephone.
To park
•
Press the line-key where you have the call in conversation.