6/1553-ANF 901 54 Uen S2 2016-03-08
84
S
ETTINGS
Some of the keys have already fixed functions programmed and are not possible to
change by the end-user. After pressing one of the programmable keys the display will
prompt the user to enter a number or a function code:
Figure 68:
In the example above, the selected key has the telephone number 0090510 assigned.
If you want to change the number, enter the new number and press the
Save
(F4) key.
If you want to delete the last entered character press the
Erase
(F3) key.
If you want to erase the number assigned to a key: do not enter any number and press
Save
(F4).
Press the
Exit
(F1) key to return to the previous menu.
Note:
To be able to program a Dial-by-function key, the telephone normally has to be
logged on to the exchange (this is set by the system administrator).
10.5
PROGRAMMING THE RING SIGNAL TYPE ON A LINE OR
MONITORING KEY
It is the system administrator that initiates a
Monitoring
key. From the telephone you
can change the type of ring signal for the key.
To change the type of ring signal for the
Monitoring
key, use the navigation keys to
go to the
Settings
menu and select the
Programmable Keys
menu by pressing
softkey
F4
. Press the wanted
Line
or
Monitoring
key and the following menu
appears: