Mitel Aastra 470 Скачать руководство пользователя страница 210 | Manualshive

Страница: 210 / 284

Mitel Aastra 470 Скачать руководство пользователя страница 210

Operation and Maintenance

210

Aastra 470 as of R3.2

syd-0337/1.6 – R3.2 – 09.2014

6. 3. 3. 2

New card with fewer ports

A card is replaced by a similar card with fewer ports.

Procedure:

Change the card and put the system into operation again. Similar procedure as de-
scribed in

"Replacing a defective interface card", page 209

The following data is deleted:

• The system and terminal configuration data of the terminals on the terminalin-

terfaces that are no longer present in the new configuration.

• The system configuration data of the network interfaces that are no longer pres-

ent in the new configuration.

Tab. 85

Example: Reducing the number of terminal or network interfaces

Note:

If the terminal configuration data of system phones is deleted following
the reconfiguration of a card, a warning message will appear beforehand
to give you the possibility of cancelling the process. However, this is pos-
sible only if the configuration data of the original card was not already
deleted beforehand.

6. 3. 3. 3

New card with more ports

A card is replaced by a similar card with more ports.

Procedure:

1. Change the card and put the system into operation again. Similar procedure as

"Replacing a defective interface card", page 209

2. In the WebAdmin view

Cards and modules

(

=4g

)

Confirm

the new cards.

3. Configure new ports.

The system configuration data (User No., User configuration, etc.) of the terminals
on the new ports is created as new data (default values).

Tab. 86

Example: Expanding the number of terminal or network interfaces

16DSI



8DSI

The configuration data of terminal interfaces 9...16 are deleted.

8BRI



4BRI

The configuration data of network interfaces 5...8 are deleted.

8DSI



16DSI

The configuration data of terminal interfaces 9...16 is created as new data.

4BRI



8BRI

The configuration data of network interfaces 5...8 is created as new data.

«
...
208
209
210
211
212
...
»

Содержание Aastra 470





























































































































































































































































































Отзывы:

Нет отзывов