Configuration
193
Aastra 470 as of R3.2
syd-0337/1.6 – R3.2 – 09.2014
Configuring the CPU2-S/CPU2 application card
1)
The configuration of the application card is described in detail in the Installation In-
structions for CPU2-S application card.
5. 6
Configuration Notes
The sections below contain information that may be useful before, during or after a
configuration.
5. 6. 1
Licences
All the features (even those subject to licences) can be configured without a valid li-
cence.
If you use a function or feature that requires a licence but do not actually have the
relevant licence, a trial licence is acquired automatically; it is also shown in the
overview of activated licences (
Licenses
=q9
view). With a trial licence you can
now use the function or feature free of charge for 60 days. The trial licence’s expiry
date is indicated under
Status
. This procedure can only be used once for each func-
tion or feature. Thereafter you must acquire a licence. The licence overview
(
) shows which trial licences are available.
All licences are contained in a licence code, which you can obtain from your author-
ised dealer. Each licence code can only be used for one communication server. To li-
cence several communication servers, you will obtain separate licence codes to
match the licence information of the individual communication server. If a commu-
nication system consists of several communication servers (e.g. in a AIN), normally
only one licence code is required on the Master.
A new communication system must be activated first after commissioning. Other-
wise, the communication server changes after 4 operating hours to limited operat-
ing mode.
Enter the licence code in the
Licenses
(
=q9
) view.
If you have received a voucher (or with the help of an EID number), you can also ob-
tain the licence code via Aastra Connect
(partner login
required). You can find instructions about this in WebAdmin help.
See also:
1)
The application card CPU2 is no longer available.