During the call
23
Note:
this function is only offered if your terminal is set to multi-key mode (supervising your
own terminal) or multi-line mode.
• Press the Fox key
Connect
.
-> The display gives the number or name of the two
correspondents:
- the communicating correspondent is displayed on the first line,
- the correspondent on hold is displayed on the second line.
Note:
when several calls are on hold on different keys, choose
the held call to be connected to the ongoing call.
• Press the
Conf.
Fox key.
-> A three-way conference call is set up between you and your
two parties.
If one of them hangs up, you stay on line with the other..
To leave the conference call:
During the conference call, if you want to leave your two parties
talking to one another:
• Press the
Transfer
Fox key
You can also simply hang up the headset or press
-> The two parties stay in communication.
Note:
if it fails, your phone rings again.
Other features available during a call
*
Saving the correspondent’s number :
You can save the distant correspondent’s number to a
programmable key, whether the call is incoming or outgoing.
1 - Press the
Memory
Fox key.
2 - Press a programmable key.
-> The number will automatically be stored, and can be dialled
by pressing the programmable key in question.
Write the correspondent’s name on the label beside the
programming key.
Note:
this action can crush a previous programming,
except that of a key programmed in multikey.
Connect.
Conf.
Transfer
* Depending on the programming performed by the system operator.
Memory