Mitel 6800 Series, Руководство администратора

Страница: 640 / 1113

Mitel 6800 Series SIP Phone Release 4.2.0 SP2 Administrator Guide
6-51
Use the following procedure in the configuration files to configure the transport protocol for SIP
services and RTCP summary reports.
For the specific parameter you can set in the configuration files, see Appendix A, the section,
“SIP Services/RTCP Summary Reports Transport Protocol Settings” on
page A-300
.
CONFIGURABLE ALPHANUMERIC INPUT ORDER FOR USERNAME
PROMPTS
A configuration parameter
username alphanumeric input order
is available for the 6863i and
6865i IP phones allowing administrators the ability to change the default behavior of the keypad
input order during username prompts. By default, keypad input order during username prompts
changes from uppercase letters to the respective digit and then to lowercase letters with each
successive press of the key. For example, when pressing “2” on the keypad, the following will
be input with each successive press:
When the
username alphanumeric input order
parameter is defined as “
1
”, the respective
digit will be available as the first input option followed by upper case and then lower case letters.
For example, when pressing “2” on the keypad with this parameter enabled, the following will
be input with each successive press:
The behavior of the
username alphanumeric input order
parameter is applicable to the
following username prompts as displayed on the phone’s UI:
• HTTPS Login User Name
CONFIGURATION FILES
# OF PRESSES LETTER/NUMBER
1 A
2 B
3 C
4 2
5 a
6 b
7 c
# OF PRESSES LETTER/NUMBER
1 2
2 A
3 B
4 C
5 a
6 b
7 c