Mitel 6800 Series, Руководство администратора

Страница: 538 / 1113

Mitel 6800 Series SIP Phone Release 4.2.0 SP2 Administrator Guide
5-275
Enabling/Disabling Directories and Renaming Labels
Administrators have the option of enabling or disabling the respective directories on the phone
as well as changing the default folder labels. These actions can be performed using the
configuration files or through the phone’s UI.
Enabling/Disabling Directories and Renaming Labels Using the Configuration Files
Use the following procedures to enable/disable directories and rename directory folder labels.
For specific parameters you can set in the configuration files see Appendix A, the section,
“Enhanced Directory Settings”
on
page A-129
.
Enabling/Disabling Directories and Renaming Labels Using the Phone UI
Use the following procedure on the phone’s UI to enable/disable directories and rename
directory folder labels.
For the 6863i/6865i:
1.
Press the key on the phone to enter the Option List.
2.
Select
Directory
.
3.
Select
External Sources.
4.
Navigate to the Directory Source you wish to enable/disable (e.g. LDAP) and press the
4
Enter
key.
5.
Navigate to the
State
setting and press the
4
Enter
key.
6.
Select a state (
ON
or
OFF
).
7.
Press the key or select
4
Set.
Your selection will be immediately applied to the phone.
8.
Navigate to the
Label
setting and press the
4
Enter
key.
9.
Using the dialpad keys, enter in a name for the respective directory folder.
10.
Select
4
Set.
Your selection will be immediately applied to the phone.
For the 6867i/6869i:
1.
Press on the phone to enter the Options List.
CONFIGURATION FILES
IP PHONE UI
Note:
CSV 1 and 2 are enabled by default. All other Directory sources are disabled
by default.