Mitel 6800 Series, Руководство администратора

Страница: 389 / 1113

Operational Features
5-126
When the phone exits the incoming ringing state (e.g. the incoming call is answered), the tone
device of the phone will revert back to originally configured audio device.
CONFIGURING THE RING TONE VIA SPEAKER DURING ACTIVE CALLS
FEATURE
Use the following procedures to configure the ring tone via speaker during active calls feature.
For specific parameters you can set in the configuration files, see Appendix A, the section,
“Ring
Tone via Speaker During Active Calls Settings”
on
page A-178
.
INDIVIDUAL CONTACT RING TONE SUPPORT
Individual contact ring tones are supported by the 6800 series SIP phones. Individual contact
ring tones can be used during incoming calls to help users identify the party calling. Users are
now able to select contact-specific ring tones (from the phone’s 15 preloaded as well as the 8
custom ring tones) for respective contacts in their local directory, which will be played back
when a call from the respective contact is incoming.
Individual contact ring tone support is dependent on the phone’s directory lookup functionality.
During an incoming call, the local directory is examined against the phone number of the
incoming call. If a match is found and the contact has an associated contact ring tone, the
contact ring tone is played. If a match is not found or if a contact ringtone is not assigned, the
standard ring tone for the line being used to field the incoming call is played.
As individual contact ring tone support is applicable to the local directory, users that would like
to apply a ring tone for a contact in an external directory source (e.g. CSV-based directories,
Exchange Contacts, LDAP, and Xsi directories) or Received Callers List/Outgoing Redial List
must first copy the desired contact to the local directory. Users can also manually create a local
directory contact or edit an existing local directory contact to assign an individual contact ring
tone. For details on how to create a new local directory contact, edit an existing local directory
Notes:
1.
The “
ring audibly enable
” parameter is disabled by default.
2.
This feature is not supported when utilizing the headset audio mode.
3.
With this feature enabled and when the phone’s speaker is playing the incoming
call’s ring tone, call-waiting tones will not be played.
CONFIGURATION FILES
Notes:
1.
The individual contact ring tone feature is compatible with the directory loose
matching feature described in "Directory Loose Number Matching‚" on page 279 .
2.
In instances where a custom ring tone is selected as the individual contact ring tone
for a local directory contact and subsequently the custom ring tone is deleted, the
standard ring tone will be played.
3.
Downgrading to a firmware lower than Release 4.2.0 SP1 and then upgrading back
to Release 4.2.0 SP1 or greater will cause the individual contact ring tone settings
to be lost.