Mitel 6800 Series, Руководство администратора

Страница: 330 / 1113

Mitel 6800 Series SIP Phone Release 4.2.0 SP2 Administrator Guide
5-67
LOCKING THE IP PHONE KEYS USING THE CONFIGURATION FILES
Use the following procedures to lock the softkeys and programmable keys on the IP phone.
For specific parameters you can set in the configuration files, see Appendix A, the
section,
“Locking Keys”
on
page A-261
.
LOCKING/UNLOCKING THE SAVE AND DELETE KEYS
By default, the 6865i has two keys dedicated to the
Save
and
Delete
functions. These two keys
can be made programmable by the Administrator, freeing up the total number of programmable
keys if required.
If a System Administrator unlocks the
Save
and
Delete
keys, these keys can be configured
with the same functions that are available for the other programmable keys. Only the System
Administrator can unlock these keys.
The
Save
key allows you to save entries to the Local Directory and perform a Save-To from
the Received Callers List. It also allows you to save speeddial information to a programmable
key. You can also use the
Save
key while using specific XML applications.
The
Delete
key allows you to remove entries from the Local Directory List and Received Callers
List. (Must enter the Directory or Received Callers List and select an entry, then press twice to
delete entry).
By default, the
Save
and
Delete
keys are locked so that a user can use them for saving and
deleting only. An Administrator can unlock these keys using the configuration files, allowing the
expmodX keyN locked expmodX keyN type
expmodX keyN label (M685i
only)
expmodX keyN value
expmodX keyN line 6865i
6867i
6869i
6873i
hardkeyN locked hardkeyN type
hardkeyN value
hardkeyN line 6863i
6865i
6867i
6869i
6873i
Note:
The 6863i and 6865i IP phones prevent users from setting a Speeddial key via
the Phone UI on a key that has been locked.
CONFIGURATION FILES
Note:
Applicable to the 6865i IP Phone only.
LOCKING PARAMETER IMPACTED PARAMETERS APPLICABLE PHONE MODELS