Mitel 6800 Series, Руководство администратора, Страница: 1010 / 1113

Mitel 6800 Series SIP Phone Release 4.2.0 SP2 Administrator Guide
A-268
CONFIGURABLE BLF AND BLF/LIST KEY BEHAVIOR WHEN IN AN
ACTIVE CALL
Note:
Applicable to the 6865i, 6867i, 6869i, and 6873i IP Phones only.
PARAMETER –
blf key mode
CONFIGURATION FILES
startup.cfg, <model>.cfg, <mac>.cfg
DESCRIPTION
Specifies the behavior when a BLF, BLF/List, or BLF/Xfer key is
pressed during an active call.
If the parameter is defined as "0" (default), upon a BLF or BLF/List
key press, the BLF or BLF/List number will be sent as DTMF tones
in the active call.
If defined as "1", upon a BLF or BLF/List key press, the active call will
be placed on hold and the phone will place a call to the BLF or
BLF/List number using the next available line.
If defined as "2", upon a BLF or BLF/Xfer key press, an HTTP GET
will be triggered on the URI defined in the "action uri blf" parameter.
Note:
If defined as "2", a valid URI must be defined for the "action uri
blf" parameter. If a valid URI is not defined, the key mode behavior
will revert to the default value (DTMF in active call).
FORMAT
Integer
DEFAULT VALUE
0
RANGE
0 - 2
0 (DTMF in active call)
1 (Active call placed on hold and BLF or BLF/List number dialed out
using the next available line)
2 (HTTP GET triggered on the URI defined in the "action uri blf"
parameter)
EXAMPLE
blf key mode: 2