Mitel 612 DECT Скачать руководство пользователя страница 89

Страница: 89 / 116

Personalizing your phone

Mitel 622 DECT Phone

eud-1720/1.0 – R3.0 – 08.2015

Configuring voice mail

This section explains how to set your voice mail.

Managing personal greeting

You have the possibility to record up to two different greetings (e.g.for absence or holi-

day). Give each greeting the relevant name.
Depending on the system configuration a caller may or may not be able to leave a mes-

sage (for the symbols see chapter "Display symbols", page 18).
If no personal greeting is activated or if none is available, the global greeting is activated

automatically, provided it has been recorded. Contact your system administrator for more

information.

Press the navigation key to the right or the

Menu

softkey.

Voice mail

Greeting

Scroll to

Voice mail

Greeting

and press the

Select

softkey.

Renaming greeting:

Select the greeting you want and press the

Edit

softkey.

➔

Enter the appropriate name for your personal greeting.

Record the greeting:

Select the greeting you want and press the

Record

softkey.

➔

Now record your personal greeting text.

Playback the greeting:

Select the greeting you want and press the

Play

softkey.

➔

You can monitor your personal greeting text and re-record it if neces-

sary.

Selecting the greeting:

Select the greeting you want and confirm with the

softkey.

➔

The announcement last recorded is automatically activated.

Notes:

• To find out how to configure call forwarding to your voice mail, refer to

the chapter "Forwarding to voice mail", page 52.

• For further information on voice mail refer to the chapter "Listening to

voice message", page 53 or in the User Guide Voice Mail Systems on

the

Mitel DocFinder

Содержание 612 DECT





















































































































Результаты поиска

Содержание 612 DECT

Отзывы:

Бренды по названию

Популярные бренды

Mitel 612 DECT, Руководство пользователя

Результаты поиска

Содержание 612 DECT

Отзывы:

Бренды по названию

Популярные бренды