CU-v2.1
babyTEL Mitel 5000 CP Configuration Guide
page 1 of 6
babyTEL Mitel 5000 CP Configuration Guide
Introduction
The information in this document is intended as a general guide to help you set up the babyTEL service on
your SIP compatible telephone system. It contains only babyTEL-specific parameters that need to be
configured on your Mitel 5000 CP. For full and proper functioning of the babyTEL service and all other
features, your Mitel 5000 CP should be set up according to the detailed instructions provided by the
manufacturer in their configuration guide.
Step 1 - Gather all the necessary information
Your User ID and Web password were provided to you in the Signup Confirmation email. Go to the
babyTEL website (www.babytel.net) and login using your ID and password. (The login command can be
found at the top right corner of the page.) Click on babyTEL Service to expand the menu and then click on
SIP Parameters. A page similar to the example shown below will be displayed, with values relevant to
your account.
Please have this information at hand when you configure your system.