MiTAC TYAN S5557, Руководство пользователя

Страница: 14 / 95

http://www.tyan.com
14
DBG_HD1: TYAN Module Header
Signal Pin Pin Signal
P3V3 1 2 FRAME_N
LAD0 3 4 KEY
LAD1 5 6 PLT_RST_N
LAD2 7 8 GND
LAD3 9 10 CLK_33M
DBG_SERIRQ 11 12 GND
DBG_PRES_N 13 14 VCC3_AUX
P3V3(NI) / GND 15 16 RST_ESPI_RESET_N
USB3_FPIO1: Front USB3.0 Connector
Signal Pin Pin Signal
+5V 1 2 P0_RX_N
P0_RX_P
3 4
GND
P0_TX_N 5 6 P0_TX_P
GND 7 8 P0_N
P0_P
9 10
OC_N
P1_P 11 12 P1_N
GND 13 14 P1_TX_P
P1_TX_N 15 16 GND
P1_RX_P 17 18 P1_RX_N
+5V 19 20 Key
J60: Clear CMOS Jumper
Normal ( Default )
Clear CMOS
Pin
1 2 3
Signal
VBAT RTCRST# GND
You can reset the CMOS settings by using this jumper.
This can be useful if you have forgotten your system/setup
password, or need to clear the system BIOS setting.
1. Power off system and disconnect power connectors from
the motherboard.
2. Remove the jumper from Pin_1 and Pin_2 (Default
setting).
3. Move the jumper cap to close Pin_2 and Pin_3 for
several seconds to Clear CMOS.
4. Put jumper cap back to Pin_1 and Pin_2 (Default setting).
5. Reconnect power connectors to the motherboard and
power on system.